SW-SS0003S

SW-SS0003S--NO LONGER AVAILABLE

For copper to copper connections. Flows quickly at brazing temp. Requires <0.005" close joint tolerance. Similar to the copper base metal, but phosphorus containing alloys. Should not use if braze is exposed to sulfur or sulfur compounds in service.

Features/Benefits

• Exposure to pressured steam can also result in accelerated corrosion.
• For copper-base alloys, such as brass or bronze, the joints should be fluxed.
• Should not be used on nickel-base and iron-base alloys, as the phosphorus reacts with the nickel or iron to form brittle compounds at the interface of the joints.
• Should not be used where the joints are exposed to sulfur compounds, especially in gases or oils at temperatures above normal room temperature.
• The self fluxing property of this filler metal is effective on copper only.

Locate a Distributor Near You