Hover over picture to Zoom
Click to enlarge
VG640TL
VG640TL--WIRELESS VACUUM GAUGE
Dual port, high resolution, fast response digital vacuum gauge provides ultimate productivity. The VG640TL works with the Supco® Techlink™ App, featuring real time visual graphics, alarms and reporting capabilities, such as creating a PDF report, so technicians can share information with their offices or their clients.
Features/Benefits
- Bluetooth® Low Energy (BTLE) Standard (V4.1)
- Contaminant & Oil Resistant Lifetime Sensor
- Display Resolution: As low as 0.5 Micron
- Easy to Use: configures in seconds with an iOS® or Android® device
- Low & high vacuum alerts
- Real time viewing & logging with graphs
- Record & export the evacuation process to .pdf/Excel/.csv formats
- Remote Bluetooth® monitoring from Up to 200 ft. away
- Time evacuation and vacuum decay process
- Use as a stand alone gauge or wirelessly paired with a mobile device for access to a suite of remote features
- Vacuum Coupler Included (P/N VGC)
- WARNING: Prop 65 info
| Vacuum Range: | 0 to 19000 Microns (0 to 2600 Pascal) |
| Update Rate: | 0.5 Seconds |
| Operating Temperature: | 0°F to 150°F (-17°C to 65°C) |
| Overpressure: | 800 PSI Max. |
| Dimensions: | 5.5" x 3" x 1.5" |
| Fitting: | 1/4" SAE Flare Fitting , 45° thread |
| HVAC/R |
| SUPCO® Techlink™ |
| SDS | Product Sheets | Cross Reference Information |
| no entry | VG640TL_prd_001.pdf |
no entry |
| Manuals | Application Sheets | Software |
| no entry | no entry | no entry |
No Cross Reference Available
No Accessories Available
| Does the sensor need to be cleaned?: | Yes. The gauge works best with periodic cleaning. |
| What is the maximum operating pressure of the VG vacuum gauges? : | 500 PSI |
| My vacuum gauge screen reads 'Calibrating', is it OK to use?: | Self calibration can take as long as 30 seconds and is performed every 15 minutes or when the VG64 senses a large ambient temperature change. When the unit is self calibrating and "Calibrating" is displayed, the vacuum value will not change. |
| There are no numbers on the display, just 3 dashes?: | 3 dashes indicate the gauge has not pulled down below 19000 microns, it is still reading at atmosphere. |
| Could not hold a stable reading, even when blocked off from a system. It seems to have an internal leak that prevents a consistent vacuum. Is Gauge possibly leaking, can't get accurate reading?: | SUPCO VG64TL does not function in the same manner as most vacuum gauges. This is due to the more sensitive sensor used in VG64TL, it is always calculating any moisture in the system, as we as any Outgassing that is present. In light of this, once isolated, the readings will gradually increase, then level off. The leveled off micron reading will be higher than the pulled down number. If a leak was present, the reading would go all the way back up to atmosphere (ATM). |
